sales@brightwaterenvironmental.co.uk
Call _ 020 _3_303_ 3249

Specification

Titanium AOP model range

Model AOP1 AOP5 AOP10 AOP20 AOP50 AOP100 AOP400
Throughput
 
 
 
 
 
 
 
Maximum flow (l/s)
0.30
1.40
2.80
5.5
13.9
27.7
111.1
Maximum flow (m3/hr)
1
5
10
20
50
100
400
Water Pressure Drop (bar)
<0.1
<0.1
<0.1
<0.1
<0.1
<0.1
<0.1
 
 
 
 
 
 
 
 
Electrical Specifications
 
 
 
 
 
 
 
Voltage (v)*
230
230
230
230
230
230
400
Power Consumption (W)
26
100
200
380
700
1300
4930
Fuse Rating (amps)
3
3
3
3
5
13
3 x 10
 
 
 
 
 
 
 
 
Dimensions
 
 
 
 
 
 
 
Diameter x length (mm)
75×475
75×895
120×890
160×960
225×955
305×955
606×979
Material
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium
Thread Connection (BSP)
DN15
DN25
DN50
DN100
DN125
DN150
DN300
 
 
 
 
 
 
 
 
Supervised Features
 
 
 
 
 
 
 
Continuous monitoring of UV radiation

yes

yes

yes

yes

yes

yes

yes
Control of Lamp life time
yes
yes
yes
yes
yes
yes
yes
Preheating of cathodes
yes
yes
yes
yes
yes
yes
yes
Information about alarms
yes
yes
yes
yes
yes
yes
yes
Soft start
yes
yes
yes
yes
yes
yes
yes
Measurement UV intensity
yes
yes
yes
yes
yes
yes
yes
Remote monitoring of system
yes
yes
yes
yes
yes
yes
yes
Measurement of water temperature in the reactor

yes

yes

yes

yes

yes

yes

yes
Solenoid drain valve water temperature control

yes

yes

yes

yes

yes

yes

yes

*110V units available on request

The Titanium AOP is made up of a small number of components and has no moving parts. This makes it reliable, quick and easy to install.

It is easy to configure the Titanium AOP to meet purification needs, water flows and available space. The range includes 7 models that may be installed either vertically or horizontally and have the capability to treat flows from 0.1 litre /second up to 111 litres / second. For higher flow situations units may be fitted and used in parallel.

The Titanium AOP’s control unit includes an alarm function, which can be connected to a Building Management System (BMS) for example, to indicate when a lamp requires changing.

In waterborne pipe systems there is a possibility that the piping will degrade, giving rise to many types of internal surface damage, anomalies, corrosion and, where design changes have occurred, potentially dangerous so called ‘dead legs’ or ‘dead ends’.

The environment in a piping system, irrespective of piping material, may thus be such that Legionella and other micro-organisms are present, and, as a result, there is a possibility that Legionella and other micro-organisms may continue to exist in the system even after installation and operation of Titanium AOP.

Given the possibilities for Legionella and other micro-organisms to continue to exist in any waterborne system, BrightWater Environmental Ltd do not accept any liability whatsoever for damages caused by the existence of Legionella and other micro-organisms in waterborne systems where Titanium AOP is installed.